This usually is caused by the screws/bolts which hold them in place becoming loose and the stesses of window movement push the guide tracks out of alignment.
To repair this problem requires that the door inner trim panel be removed for access to the interior of the door and that the guide channels be properly realigned and the mounting screws or bolts be well tightened to reduce the chance of recurrence.
When I perform this repair procedure, added security, I install a "lock washer" [either a 'split' lock washer or a 'star' type lock washer] beneath each threaded fastener.
i need help paying to replace my windows a grant to pay for windows in my home
If the whole computer completely shutdown, then you just need to press the power button again.
is there help for that ?
My MB E430 had same issue with all four windows after battery was temporarily disconnected to resolve another issue. After checking fuses and determining none were blown, I investigated and learned that the power windows on a MB need to be re-sync'd after power interruption.
can you please help with my plumping and windows.
True
i need to know wwhere the fuse is at for the power windows on a 99 ford explorer
No, You have to many programs on your computer or need to clean it or need to do a disk fragmentation anything. Upgrading does nothing but slow it down even more!
You'll need to add the necessary relay and fuse, you'll probably have to do the wiring yourself, and you'll be better off to take the doors from one which already has power windows, rather than trying to convert yours to power windows.
There may be a fuse blown if the power vent windows don't work on a 1999 Dodge Caravan. If the problem isn't the fuse, the motor in the power windows may need to be replaced.
Generally with any power windows you need to check if you have power & ground to the motor. If you can put power to it, and it works, that tells you the motor is functioning. Then you need to replace the switch. If the motor doesn't work either up or down. Then the motor is bad.
you need to reconnect the battery