0
What else can I help you with?
Can 2002 Honda CRV low beam burn out and high beam still work or is something wrong with wiring since you Already checked fuses?
Try replacing bulb--It is a double filamented bulb
How do you replace the headlight bulb located on a 1994 Acura Legend?
replacing headlights on a acura legend 1995
How do you replace fog light on Acura CL 2002?
How to replace fog light bulb for acura rl 2002
What size bulb do I need for the front headlight of a 2002 Oldsmobile intrigue?
Low beam is a 9006 bulb, high beam is a 9005.
What type bulb to change the low beam headlight bulb on a 2002 Hyundai Sonata?
These are H7 bulbs.
Why is the R low beam light doesn't work while both the high beam lights works?
most like the low beam filiment in the right light is bad but the high beam filiment is still good, try replacing bulb. If replacing bulb does not fix problem then you probably have voltage problems and should check the voltage reading and the plug.
What size bulb goes in the headlights of a 2002 Oldsmobile intrigue?
9006 for the low beam, 9005 for the high beam
Replacing 2003 acura 3.2 TL headlight bulb?
The headlight bulbs just twist counter-clockwise in and out of place. They are located under the hood on either side of the radiator, directly behind the headlights. The foglights are 9006 low beam bulbs.
What type of headlamp bulb in 2002 expedition?
low beam - 9006 high beam - 9005 according to the owners manual
What size light bulb goes in the headlights of a 2002 Oldsmobile intrigue?
9006 low beam, 9005 high beam
What would cause low beam not to work after replacing the headlight bulb in the passenger side?
Use a 12 volt tester and turn thr lights on and see if you have power, then make sure the bulb is a high/low beam.
How do you raplace the low beam headlight bulb on a 99 acura tl?
To replace the low beam headlight bulb on a 1999 Acura TL, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; twist the bulb socket counterclockwise to remove it. Disconnect the old bulb by pulling it straight out, then insert the new bulb, making sure not to touch the glass with your fingers. Finally, reattach the bulb socket by twisting it clockwise back into the assembly and test the new bulb to ensure it works.
