Check for a spring at the very top of the pedal itself, running from the pedal above the pivot point to the firewall. The spring is likely to have come loose and be attached at one end or the other but not both.
The '96 200sx has no fluid for the clutch. This car has a cable operated clutch that needs to be adjusted. If the cable breaks the clutch will not disengage. If the clutch is getting tight it will need lubed. If lubing the cable doesn't work a new cable is needed.
To remove the clutch on a Nissan 200SX, start by disconnecting the battery and lifting the vehicle for access. Remove the transmission by unbolting it from the engine, disconnecting any linkages, and supporting it with a jack. Once the transmission is out, unbolt the pressure plate from the flywheel, then take out the clutch disc. Finally, inspect the flywheel and replace or resurface it if necessary before installing the new clutch components.
Where is the starter to a Nissan 200sx
Metal piece was from the end of the clutch cable.
the horn on my '97 Nissan 200sx doesn't work. how do I fix it?
To replace the clutch cable on a Nissan 200SX, first, ensure the vehicle is safely secured and the battery is disconnected. Begin by removing the interior panel to access the clutch pedal assembly, then detach the old cable from the pedal. Next, route the new cable through the firewall and connect it to the clutch fork in the transmission. Finally, adjust the cable tension as needed and reassemble any panels or components that were removed.
you cant edit: In order to start any manual transmission car, the clutch must be fully depressed.
oilk sending unit on nissan 200sx located
why or how do i find the brake light switch on my 1997 nissan 200sx. how do i chane it out.
I have a 1997 200sx se with a sunroof.
http://www.kuddy.net/200sx/replacing_fuel_pump.html
Honda 200sx ? no such car its eather a Honda s2000 or a Nissan 200sx