sounds like transmission problems, probably need to have a professional look at it
To remove the speed sensor from a 1994 Isuzu Trooper, first ensure the vehicle is on a level surface and the ignition is turned off. Locate the speed sensor, which is typically found on the transmission housing. Disconnect the electrical connector and use a socket or wrench to remove the retaining bolt. Once the bolt is removed, gently pull the sensor out of the transmission.
Yes, the 1995 Isuzu Trooper is equipped with an overdrive feature. It typically comes with a 4-speed automatic transmission that includes an overdrive gear, which helps improve fuel efficiency during highway driving. Additionally, some manual transmission models may also offer an overdrive function. Always refer to the owner's manual for specific details about your vehicle's transmission.
Yes, both transmissions are the same.
The Mustang GT (2011 model) has a 6-speed manual transmission standard and a 6-speed automatic transmission optional. The 2010 Mustang GT had a 5-speed manual transmission standard and a 5-speed automatic transmission optional.
Yes. You would need to leave both the transmission and the transfer case in neutral, and leave the hubs unlocked if you have manual locking hubs.
From 1999 to 2002: 2WD: Protrudes from the transmission housing, just ahead of the propeller shaft. 4WD: Protrudes from the rear output shaft housing of the transfer case. Not sure about earlier years, but probably the same location,
Yes, the VW Rabbit will be available in both standard and automatic transmission. The transmission options are a 5 speed manual or 6 speed automatic.
there is a nut on the driyer side of transmission you need to remove and fill with a extension hose
The 1990 Isuzu 2.8 liter engine MAF sensor can be found on the firewall in the engine compartment. The sensor will be on the passenger side of the firewall.
If I am not mistaken a manual or 5 speed transmission doesn't have transmission fluid.
i have a 1990 Isuzu trooper as well and the speedometer and odometer also quit working, they both come off of a mechanical cable that is attached to the drive train. that cable breaks, and you lose both speed and odometer indications. they are extremely difficult to find, so if you do, write me back...