In the back of the intake manifold on a d16z6 and on a d16y8 it should be on the air intake arm.
On a D16Z6 Honda Civic, the air intake temperature sensor is located on the intake manifold, typically near the throttle body. It is often positioned on the side of the manifold, near the intake air duct or air filter housing. If you're having trouble locating it, refer to the vehicle's service manual for specific diagrams and details.
A d16z6 has 16 valves 8 intake and 8 exhaust valves.
D16z6
5w30 is what Honda recommends.
D16z6 vtec (1.6L SOHC)
the b16a2 is alot better because it is a DOHC(dual over-head cam) VTEC which makes 160 hp. the d16z6 is a SOHC(single over-head cam) which makes about 110-120 hp.
its located in the distributor.
D16Z6 engine are manufactured by Honda company and are found in three models of Honda Civic (Si, ES and ESi) and in 2 models of Honda Del Sol (Si and ESi).
it will bolt it but you have to wire the VTEC
i dont know yet but in trying that same thing on my car
it depends on your head gasket. a d16y8 head gasket will work best for giving you the highest compression. as for the compression ratio.. i do not know. i would not worry about it since the power out put will be approximate to that of a d16z6 give or take a few hp.