0
There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
What else can I help you with?
How do you replace a CV Axle on 1996 Isuzu Trooper?
To replace a CV axle on a 1996 Isuzu Trooper, start by safely lifting the vehicle and removing the front wheel. Next, disconnect the lower ball joint and any necessary suspension components to free the axle from the hub. Remove the axle nut, and then slide the CV axle out of the transmission and the hub. Install the new axle by reversing the steps, ensuring all components are securely reattached and torqued to the manufacturer's specifications.
Need a diagram for a rear axel on a Isuzu trooper 94 DOHC V6 3.2 4x4?
replace rear axle bearing
How many oz of fluid in rear axle of Isuzu trooper?
1.5 qts of 80w90 oil 1.5 qtys of 80w90 weight oil
What axle gear ratio does 1992 Isuzu trooper have?
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
What does the flashing axle symbol on a 1998 Isuzu Trooper stand for?
I cant be totally sure but I think it is the Diff lock engaged warning light Best wishes
How to remove a cv axle on a 2002 izusu trooper?
To remove the CV axle on a 2002 Isuzu Trooper, first, safely lift and secure the vehicle. Remove the wheel and tire, then detach the brake caliper and rotor to access the axle. Remove the axle nut using a socket, then disconnect the lower control arm or the inner joint from the differential by unbolting it. Finally, carefully pull the CV axle out from the hub and the differential.
What should the RPM be on 1996 dodge ram 1500 v8 magnum at 70 mph?
That depends on the rear axle ratio. 2500 rpm ?That depends on the rear axle ratio. 2500 rpm ?
Need to see how to replace seal and baring and snap rings on a 1996 izuzu trooper front axle?
Show video on
What causes the front axles to lock up causing the vehicle not to move when you put a 1994 Isuzu Trooper into four wheel drive?
a srrewed up axle, tranny, or somethnig is binding.
How do you tell what is the rear end gear ratio on a 1996 ford ranger XLT with a 2.3 engine?
Open the drivers door and look at the informaion sticker(s) for the axle code Each axle code corresponds to a specific axle ratio
What rear end gears come stock on a 2000 dodge ram 1500 sport?
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
How do you remove the front hub on a 1989 Isuzu trooper?
To remove the front hub on a 1989 Isuzu Trooper, start by loosening the lug nuts and lifting the vehicle. Remove the wheel, then take off the brake caliper and rotor to access the hub assembly. Next, remove the hub retaining bolts and any associated components, such as the axle nut if necessary. Finally, gently pull the hub off the axle shaft, ensuring any seals or bearings are not damaged in the process.
