answersLogoWhite

0

Belts must be adjusted or replaced.

Most likely not the timing belt (notched) & there are two others.

One can be adjusted but most likely the dealer needs too as other shops say they cannot be adjusted.

Last cost at dealer $90 in 2009 adjustment only!

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Where is the air conditioner compressor in a 2006 Hyundai sonata V6 engine?

In a 2006 Hyundai Sonata with a V6 engine, the air conditioner compressor is located at the front of the engine, mounted on the engine block. It is typically positioned near the drive belts, making it accessible for maintenance. You can identify it by its round shape and the presence of refrigerant lines connected to it.


Where is the starter located on a 2010 Hyundai Sonata?

The starter on a 2010 Hyundai Sonata is located on the driver's side of the engine, near the transmission. It is positioned towards the bottom of the engine block, making it somewhat difficult to access without lifting the vehicle. To reach it, you may need to remove some components or covers, depending on the specific layout of your model.


Where is the crankshaft sensor located on a 2000 Hyundai Sonata v6?

On a 2000 Hyundai Sonata V6, the crankshaft position sensor is typically located near the bottom of the engine, on the engine block, close to the crankshaft pulley. It's usually mounted on the transmission bell housing or the engine block itself, making it accessible from underneath the vehicle. To locate it precisely, you may need to remove any obstructions like the engine cover or other components in the vicinity.


Where on a 2010 Hyundai sonata is the camshaft position sensor left front located?

On a 2010 Hyundai Sonata, the camshaft position sensor is located on the left front side of the engine, typically near the cylinder head. It is positioned close to the camshaft, making it accessible for inspection or replacement. You may need to remove some components or covers to reach it easily.


How do you replace the spark plugs on a Hyundai Sonata 2013 4Cyl.?

To replace the spark plugs on a 2013 Hyundai Sonata 4-cylinder, first, ensure the engine is cool and disconnect the battery. Remove the engine cover and then carefully detach the ignition coils by unscrewing them and pulling them out. Use a spark plug socket to unscrew the old spark plugs, then install the new ones, making sure to torque them to the manufacturer’s specifications. Finally, reattach the ignition coils, replace the engine cover, and reconnect the battery.


Why does a car making a squealing sound when driving through water?

Water from the road has splashed up into the engine serpentine belt causing belt slippage that makes a squealing noise. The sqealing is one of your engine assessories that use the serpentine belt to drive it.


Why would a Hyundai Sonata make a knocking sound on the roof only when it rains?

Noises are impossible to correctly diagnoise when not heard. Take it to a garage when it ts making the noise.


How do you spell squealing?

That is the correct spelling of "squealed" (made squealing sound, or slang for betrayed).


What causes a hesitation like thump with jolt when accelerating on 2002 Hyundai Sonata First while making a turn now occassionally also with acceleration?

The hesitation and thump you're experiencing in your 2002 Hyundai Sonata could be caused by several issues, including a failing engine mount, which can lead to excessive movement of the engine during acceleration or turns. Additionally, problems with the transmission, such as low fluid levels or a slipping clutch, could also result in a jolt or hesitation. Worn-out suspension components or issues with the drivetrain, such as CV joints, might contribute to the symptoms as well. It's advisable to have a qualified mechanic diagnose the issue for an accurate assessment.


What problems will you face when replacing the alternator on a 2001 Hyundai Sonata 4 cylinder?

When replacing the alternator on a 2001 Hyundai Sonata with a 4-cylinder engine, you may face issues such as limited space, making it difficult to access the alternator bolts and connectors. Additionally, dealing with the serpentine belt can be tricky, requiring proper tension release to remove it safely. Corrosion on electrical connections or the mounting bracket can complicate removal and installation, and ensuring the battery is disconnected beforehand is crucial to avoid electrical shorts. Lastly, aligning the new alternator properly during installation can be challenging, requiring careful adjustment.


How do you know when your brake pads are shot?

They might be making squealing or scratchy noises when you brake


Where is the output sensor on a 2002 sonata?

On a 2002 Hyundai Sonata, the output speed sensor is typically located on the transmission, specifically near the output shaft. It is often mounted on the side of the transmission case, making it accessible for inspection or replacement. If you're having trouble locating it, consulting the vehicle's service manual or a repair guide can provide specific diagrams and further assistance.