"A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
symptoms
Hard starting, bad idle and possibly stalling issues
caused by
Incorrect camshaft timing
Wiring issues (harness/wiring) in intake timing control valve control solenoid system
Steady oil flow to VCT piston chamber
Faulty timing valve control solenoid (stuck open)
the fix
This code indicated a mechanical issue, electrical troubleshooting wont help so replacement of the VCT or one of it's related components is necessary.
Code P0780 means: A/T Concerns
Trouble code P0730 means:Incorrect gear ratio
Trouble code P1361 means: TDC Sensor Intermittent Interruption
P 1106 = Baro sensor performance failure.
Trouble code P0845 means:Transmission fluid pressure sensor/switch "B" circuit
EVAP Emission Control System Leak Detected (Control Canister System)
I have never heard of a code 24 on a Honda.
Code 41 means: HO2S Heater
As you do not list the code you are reading, it is impossible to answer your question.
=== ===
it means one of the solenoids or hydraulic circuit is have a problem the solenoid d check the manual to see which one. you can test them.
The Ford diagnostic code 316 is a misfire detected at engine start up.