Usually it is pre programmed for oil changes and routine maintenance.
How do you reset the maintenance light on a 2001 Honda accord ex I found some options at http://www.tegger.com/hondafaq/maintenance-reqd-light.html#why
approching maintenance
I tried holding down the trip odometer button and starting the car and holding it until the light stopped blinking.
With the engine and ignition off push and hold in the odometer reset button. While holding that button in, turn on the ignition but do not start the engine. After about 5 seconds the light will go off and the maintenance required light will have been reset.
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD
Push and hold the odometer reset button while at the same time turning the ignition switch to the on position. After about 5 seconds the light will reset.
Press and hold the odometer reset button while at the same time turning the ignition switch to on. Do not start the engine. After around 5 seconds the maintenance required light will go out.
Push and hold the odometer reset button while at the same time turning the ignition switch on but do not start the engine. After 5 seconds the maintenance required light will go out.
The wrench light in a Honda Accord means that the vehicle needs maintenance soon. It usually means that you are over your recommended mileage interval for service and that it is time for an oil change and other similar maintenance procedures.
Press and hold the odometer reset button while turing the ignition switch on without starting the engine. After 5 seconds the light will go out.
This information is listed in your owners manual. Try holding the odometer reset button in while turning on the ignition. Wait for the light to go out. This may or may not work. It works on my 2004 Accord.