The "maintenance" light means it's time for an oil change. The light should come on and blink a few times around 4500 miles (after being reset) and then will stay on solid at 5000 miles. After changing your oil reset the light by: 1. Turn on the ignition and make sure the odometer is showing 'total' vehicle mileage (not one of the trip meters) 2. Turn the ignition off and push the odometer reset button. Hold the button in while you turn the ignition back on. 3. Continue holding the button about five seconds until you see all zero's (000000) on the display. The light is now reset and won't bother you again for 4500 miles.
It means it's time to change your oil.
it means when the maintenance light is on
The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.
The time for your next oil change is coming very near.
That is the periodic maintenance light, it will go off every 4800 miles, or 4 months to remind you to take your car in for regular maintenance.
The Maintenance Required Light is not the same as the Check Engine Light. The Maintenance Required Light is telling you that there is scheduled maintenance that needs to be performed. It may mean it needs an oil/filter change. To find out what needs to be done look at the maintenance schedule in your owner's manual.
see you tube...theres a fix on there
How do you turn off the check engine light off and the tire pressure light off the air bag light off
To turn off the maintenance required light on a 2006 Honda Element, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. After this, the maintenance light should reset and turn off. If it doesn't, check if the vehicle requires any actual maintenance or consult the owner's manual for further troubleshooting.
To turn off the maintenance light for a 2006 Scion xB, first, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. Finally, turn the ignition back on to verify that the maintenance light has reset. If it remains on, repeat the process.
Time for scheduled maintenance.
The check engine light comes on when the computer has detected a problem with the emissions system. The engine maintenance light comes on when the engine needs some scheduled maintenance such as an oil/filter change.