Generally for a modern car like yours you can just pop into your local halfords or car store, tell them the make of your car and they will give you the correct bulb. You can also lift up the bonnet and open the headlights casing and find out wether you have a 3 plug bulb or a 2!!
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
you don't need a bulb
You cannot replace the headlight bulb. You need to buy a new headlight unit.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
The headlight of yourÊ2003 Sunfire is probably dimming because the bulb is dying. ÊYou will need to have this bulb replaced.
No need to remove the headlight assembly. twist & remove the light bulb from the rear of the headlight assembly. Do not touch the new bulb glass with your hands. Oils from your hands will cause bulb failure.
# 9007
Need to remove bumper
You need to remove the headlight first. After removing the headlight, you will be able to unplug the power and remove the bulb from the housing. The new bulb comes ready to plug in.
This is probably a 9004 halogen bulb but to be sure just go to your local parts store and tell them that you need a new headlight bulb for a 1998 Jeep Cherokee.
See sources and related links below for 2007 Chevrolet Impala headlight bulb part numbers.