21mm make sure to use a torque wrench and tighten to 93lbs
80ft lbs
72 to 87 ft lbs.
It should be around 80 lb/ft. To be sure look in your owner's manual or call a Nissan dealer. Do not over-torque or you will warp the rotors.
80 ft/lbs.
The torque specification for the lug nuts on a 2013 Ford Fusion is typically 100 lb-ft (135 Nm). It's important to use a torque wrench to ensure that the lug nuts are tightened to the proper specification for safety and to prevent damage to the wheel or hub. Always recheck the torque after driving a short distance to ensure they remain secure.
The lug nut torque specification for a 2013 Honda CR-V is typically 80 lb-ft (108 Nm). It's important to use a torque wrench to ensure that the lug nuts are tightened evenly and to the manufacturer's recommended specification. Always recheck the torque after driving the vehicle for a short distance, especially after having installed new tires or wheels.
The torque for the lug nuts on a cat backhoe 426c depend on what size the lug nuts are; for 1/2 lug nuts the torque should be around 80; for 9/16 lug nuts the torque should be around 140.
The lug nut torque specification for a 2013 Hyundai Elantra is typically 80-100 ft-lbs (foot-pounds). It's important to use a torque wrench to ensure that the lug nuts are tightened to the correct specification for safe wheel installation. Always consult the owner's manual or a service manual for the most accurate information.
The Torque Spec and assuming you didn't change your rims, 72-87 ft. lbs Anyone who tells you 100, are ignorant.
Torque on the lug nuts is 100 foot lbs.
Lug Nut (Bolt) Torque 110nm (80 ft-lbs)