First of all, the car must be in neutral in order for this switch to do anything; not park, neutral! Now that it's in neutral, if it's strait up the transmission is in high. At the 90 degree position, it's in low. Low is for super torque and super slow and powerful. Hi is for driving on the road.
The dashboard is the main screen, there is no previous screen available. If you mean dashboard as when you press the middle button on your controller. This should not happen, but it may be just a crash.
press the button
you press the on button
It's a latching push button switch. To operate this type of switch, you press the button, which then latches into place. To switch off, you press the button again, which returns to its home position. Just like the power switch on your TV or HI FI.
press the center button on the controller and ht the "Y" button
Press the switch and the safety button.
Locate the switch and press the reset button.
press the off button
Press the , button and select which class.
The emergency blinker switch on a 2008 Prius is located on the dashboard, typically near the center console, above the radio. It is a red triangle button that activates the hazard lights, allowing all turn signal lights to flash simultaneously to alert other drivers of an emergency situation. To use it, simply press the button, and to turn it off, press the button again. If the switch is not functioning, it may need to be inspected or replaced by a professional.
In a Toyota 4Runner, the 4-way hazard flashers can typically be activated using a button located on the dashboard, often near the center console or around the climate control area. The button usually has a red triangle icon. To turn on the flashers, simply press the button, and all turn signal lights will blink simultaneously to alert other drivers. If you're having trouble locating it, consult the owner's manual for your specific model year.
To switch from miles to kilometers on the Nissan Xterra, start by turning on the ignition without starting the engine. Then, locate the trip computer button on the dashboard or steering wheel. Press and hold the trip computer button until the display switches from miles to kilometers. Release the button, and the settings should now reflect kilometers.