0.524 kg/cm2, or about 7.5 psi
Depending on which Altima and which SR20DET you're referring to. S13 SR20DET=205 hp S14 SR20DET=220 hp S15 SR20DET=247 hp
beam for sr20det?
cannot be answered its dependant upon too many factors. what chassis, turbo, boost, compression, fuel managment, head, transmission, finaldrive, tiresize, compund, weight...
you can drop a blue bird motor sr20det. mid 13s on stock boost. is it a 200sx ser? if your not looking to spend that kinda money header intake and exhaust is allways a good start
Yes, a 240SX transmission can fit a SR20DET motor, as both components are designed for Nissan's S chassis. The SR20DET engine is commonly swapped into the 240SX, and the stock 240SX transmission (usually the KA24DE transmission) can be used with the SR20DET with some modifications. However, it's often recommended to use a transmission specifically designed for the SR20DET, like the Silvia or 180SX transmission, for better performance and reliability.
Standard boost appears to be around the 12lbs maybe climbing to 13lbs when its very cold out.
yes it will fit
sr20det you nog
You win while using boost and bpost 4 times in one round on a standard match
0.9bar
17psi
its left up to prefrance, many people like the torque that that KA24 produces due to its longer stroke. but the down side is that you need to buy the turbo kit, and buy parts to support it, with out blowing the engine up SR20DET's can make power by simply turning up the boost, but you must make sure to compensate with building it properly. and SR20's have a shorter stroke, so they usually have a higher red line, but lower torque.