Depnds on the code
11531
No, the programming code is unique to the manufacturer of the universal remote. It is possible with 'learning' remotes to get the infrared patterns from the original by 'beaming' the codes from the old one to the new one.
2002 Worked Perfectly!
465 was found during the automatic programming.
If the channel buttons on your Dish remote are not working after programming it to your Sanyo TV, it could be due to an incorrect programming procedure or a mismatch in the remote control settings. Ensure that the remote is properly synced to the TV by following the correct code entry process. Additionally, check if the remote is set to the TV mode instead of the satellite mode. If the issue persists, resetting the remote and reprogramming it may help resolve the problem.
There are several sites that offer Philips remote programming instructions. A link is provided.
As with all universal remotes, the code for this amplifier will depend upon the remote unit you have. If you have tried programming it with all of the RCA Receiver codes available, you may have to change your remote to a newer model, buy a learning remote, or use a remote like the Logitech Harmony that has a much larger code database.
It looks like that is a universal remote. You will need to call the manufacture to get the code and instructions for programming it to our receiver. Most of the time, you will not get full functionality with any remote other than DISH Network.
The remote code for a Magnavox DVD player (model MWD7006) when using an ONN universal remote typically ranges from 0030 to 0031. You can try these codes by entering them in the programming mode of the ONN remote. If these codes do not work, consult the user manual of the ONN remote for additional codes or instructions on how to program the remote.
hold down the lock and unlock buttons down at the same time for about 8 seconds on the remote. this should re-set the code.
The remote code for the Motorola VIP 1003 typically varies depending on the device you are trying to control. However, common universal remote codes for this model include 1004, 1008, and 1011. To find the correct code, refer to your universal remote's manual or the manufacturer's website for a comprehensive list of codes. Always ensure that the remote is compatible with the Motorola VIP 1003 before programming.