The recommended lug nut torque for a 2007 Honda Odyssey is typically 80 foot-pounds (ft-lbs). It's important to use a torque wrench to ensure that the lug nuts are tightened to the proper specification for safety and to avoid issues with wheel alignment. Always refer to the owner's manual or a service manual for the most accurate information.
Proper lug nut torque spec for 2007 Honda Odyssey
The bolt pattern for a 2007 Honda Odyssey is 5-lug, 4.72 inch/120mm.
80lb-ft
80 ft-lbs.
79.6 ft.lbs.
The proper lug nut torque for a 2011 Honda Odyssey is typically 80 foot-pounds (ft-lbs). It's important to ensure that the lug nuts are tightened in a crisscross pattern to ensure even distribution of pressure. Always double-check the owner's manual for specific torque specifications, as they may vary slightly based on different wheel configurations or aftermarket wheels.
2005 is 95ft/lb , earlier model are 80 ft/lb
The proper lug nut torque for a 2008 Honda Odyssey Touring is typically 80 lb-ft (108 Nm). It's important to use a torque wrench to ensure that the lug nuts are tightened to the manufacturer's specifications for safety and to prevent damage to the wheel or brake components. Always check the owner's manual or a service manual for any specific instructions related to your vehicle.
the manual says 94 ft/lbs
The lug nut size for a 2005 Honda Odyssey EX is 7/8". Lug nuts are used to secure an automobile's wheel to its axle.
19mm
Lug nut torque is 80 ft/lbs.