0 degrees,should say right on the fan shroud on the same sticker that tells the spark plug gap. In order to time it correctly you must unhook the esc electronic spark control wire which is a tan wire with a black stripe located under the black cover on the passenger side firewall. It may set off a service engine soon light. When your done timing it unhook the battery cable and the light should go out.
No it will not, There is not enough room for it to fit. A car transmission is alot smaller then a truck transmission.
Depends on the model of the truck
Assuming this is a truck, if it has a standard transmission, TDC. If it has a automatic transmission, 4 degrees BTDC.
Mercon works fine.
i have a 1967 chevy c10 truck. i want to know what 5 or 6 speed manual transmission will bolt up to the original 327?
Is there a manual to rebuild a 350 turbo transmission on a 1977 Chevy Truck on line that I can order or down load for free I think if you got to Chevy truck parts .com you can find one
Timing sets at 0 / ZERO TDC. (Top Dead Center )
Need more info, manual steering gear box, power steering gear box, 3 speed standard transmission box, or 4 speed transmission box? The truck has a 3 speed manual transmission and power steering gear box thanks The steering gear box will interchange.
Yes you can if you have all the parts to make it work from another truck.
where is the transmission censor located on a 1997 Chevy cheyenne truck
I have a 1993 Chevy S-10 Pick up truck, with a 2.5 V6 motor and 5 speed manual transmission.. I need to know what years will interchange with the transmission
under the truck, on the side passenger side of the transmission case is a screw-in bolt for check/fill