The Suzuki oil drain plug torque specification is 30 pounds. Over tightening the oil drain plug can cause the oil pan threads to strip.
It depends on what year you are looking for. A used Suzuki Esteem can cost between $12,769-$15,937 for a 2002.
#26
The 2002 Suzuki Grand-Vitara's engine produces 162 ft-lbs. @ 4000 rpm.
It does not have 1, Chevy did not use a drain plug in there converters.
It holds 12.7 US Gallons / 48.0 Liters
Haynes Manual states that for focus builds between 2001 and 2004 the recommended torque spec for the oil drain plug is 37 Nm / 27 lbf ft.
maruti 800 2002 tightening torques of cylinder head
The thermostat on a 2002 Suzuki Esteem Wagon is typically located in the engine compartment, near the engine block. It is situated at the end of the upper radiator hose, where it connects to the engine. To access it, you may need to remove the hose and possibly other components for better visibility. Always ensure the engine is cool before attempting any maintenance.
The AC drain on a 2002 Suzuki XL7 is typically located on the passenger side of the vehicle, near the firewall. It is a rubber or plastic tube that allows condensation from the air conditioning system to drain out of the vehicle. You may need to look under the car or access it from the engine compartment to find it. Always ensure the vehicle is safely lifted and supported if you need to go underneath.
I have a 2002 suzuki and the fuel pump was inside the fuel tank on mine and the fuel filter sat at the top of it. you have to take the tank off to get it done. Sorry.
to answer this question with would be too difficult to explane, its better to spend the 20 bucks and get the maintenace manual it will show you exactly how to do it
To remove the torque converter from a 2002 Volkswagen Beetle, first, disconnect the battery and drain the transmission fluid. Next, remove the transmission pan and the transmission mount to access the torque converter. Unbolt the torque converter from the flex plate while rotating the engine to access all the bolts. Finally, carefully pull the torque converter out of the transmission once it is unbolted.