chang your gasket
Feck off big hammer!
I was told 7lbs
95 in-lbs.
6-8 lb/ft.
The 2001 Nissan valve cover bolt torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
I think there is no torque required for the valve cover as long as all are evenly tightened or the seal is flat on the cylinder head it will not cause any leak. If you have tightened the valve cover screws already and there are still leaks you might want to consider putting silicone on the valve cover gasket before you attach it or you might want to consider buying a new valve cover gasket.
The PCV Valve on a 1998 Suzuki Sidekick is located on top of the manifold. There is a small plastic cover that can be taken apart by pulling sideways on it. It has two or three hoses attached and is sometimes colored blue.
It is screwed into the intake manifold between the throttle body and the valve cover
The 2001 Mitsubishi Montero Sport 3.0 liter engine valve cover torque specification is 40 pounds. You do not want to over torque the valve cover bolts, as you may ruin the valve cover gasket.
The 2000 Mazda 1.8 liter engine valve cover torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
35 ~ 46 Foot pounds of torque. Pressure plate bolts.