engine without transmission is 150kg depending on which accessories are attached.
sr20det you nog
The SR20DET engine typically weighs around 500 to 550 pounds (approximately 227 to 249 kg) when fully assembled with accessories and components like the turbocharger, intake, and exhaust manifolds. The exact weight can vary slightly depending on specific configurations and modifications. This weight makes it a popular choice for many performance builds due to its balance of power and weight.
engine model of the 1993 Nissan 240sx is the ka24de in the USA. in japan it is the sr20det.
Yes, a 240SX transmission can fit a SR20DET motor, as both components are designed for Nissan's S chassis. The SR20DET engine is commonly swapped into the 240SX, and the stock 240SX transmission (usually the KA24DE transmission) can be used with the SR20DET with some modifications. However, it's often recommended to use a transmission specifically designed for the SR20DET, like the Silvia or 180SX transmission, for better performance and reliability.
Depending on which Altima and which SR20DET you're referring to. S13 SR20DET=205 hp S14 SR20DET=220 hp S15 SR20DET=247 hp
Yes it will. You would have to do a complete engine swap. The Silvia engine is the SR20DET. They don't cost that much.
beam for sr20det?
SR20DE -- 139 kg 306 lbs SR20DET - 149 kg 328 lbs
The easiest engine swaps for a 240sx would be an sr20det or a ca18det as these require no modification to the motor mount location.
The SR20DET is generally considered better than the CA18DET due to its higher power potential, better aftermarket support, and more advanced technology, such as a stronger engine block and improved fuel injection system. The SR20DET typically produces more horsepower and torque, making it a popular choice for performance enthusiasts. However, the CA18DET can be lighter and may offer a more balanced weight distribution in some setups. Ultimately, the choice depends on personal preference and specific project goals.
yes any model of 240sx will be able to fit a sr20det as long as the harness is spliced to the old one of the stock ka. yes any model of 240sx will be able to fit a sr20det as long as the harness is spliced to the old one of the stock ka.
SR20DET will drop nicely in it, its a 2.0L turbo lump and can be found on eBay for about £1000