It will be a metric size try different sizes until you find the one that fits.
If your asking for the bolt pattern on the Toyota 4runner. It is a 6 on 5.5.
6*139.7
NO....
head bolt sequence Toyota tercel
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
It can fit if it is a manual 5speed and you swap out the v-6 bellhousing with a 22ret (22r turbo) bellhousing but good luck finding one they are hard to come by! No... only a 6 cylinder tranny will bolt to a 6 cylinder motor as same for a 4 cylinder tranny to a 4 cylinder motor but it can go in either a truck or 4runner.
sorry but no,the 22r version of the 4runner will work though
how much torque on a head bolt
Follow the transmission dipstick which is located just below your right windshield wipers in the engine bay. You should see a pan with a 10mm bolt ref. to auto trans 1999 toyota 4runner
Pls let me know the cylinder head bolt tightening sequence for toyota cressida mx83
If you have the 3.0L engine with a manual transmission it is a direct bolt up i dont know about the automatic but i am sure it is the same if you are switching from a four cylinder to the 3.4L then it requires a lot more work but it can be done a well
remove the 10mm bolt and remove it.disconnect plug at other end.