answersLogoWhite

0

On a 2004 Toyota Avalon, terminal TC (Test Connector) is typically used for diagnostic purposes, allowing access to the vehicle's onboard diagnostic system. Terminal E1 is the ground terminal for the diagnostic connector. Together, these terminals help facilitate communication with diagnostic tools when troubleshooting the vehicle's systems. For specific pinout information, it's always best to consult the vehicle's service manual.

User Avatar

AnswerBot

3w ago

What else can I help you with?

Related Questions

Where is 05 Avalon obd diagnostic connector located?

The OBD diagnostic connector in a 2005 Toyota Avalon is typically located beneath the dashboard, near the driver’s side. It can usually be found above the footwell area, close to the steering column. If you bend down to look under the dashboard, you should see the connector, which is often a 16-pin socket.


Where is 99 Toyota Avalon obd diagnostic connector locate?

The port for the On Board Diagnostic (OBD) computer is about 6 inches below the parking brake release on the driver's left. It is behind a panel marked OBD-DCS.


When was Toyota Avalon created?

Toyota Avalon was created in 1994.


How do you pull codes on 1991 Toyota Previa?

To pull diagnostic trouble codes (DTCs) from a 1991 Toyota Previa, locate the diagnostic connector under the dashboard, usually near the driver's side. Use a jumper wire to connect terminals TE1 and E1 on the connector. Then, turn the ignition key to the "ON" position (without starting the engine) and watch the check engine light; it will blink in a specific pattern to indicate the trouble codes. Count the blinks to interpret the codes, which can be referenced in a repair manual or online for further diagnosis.


Where is the diagnostic link connector for 2000 Toyota Camry?

It's under the steering wheel just on the edge of the plastic panel.


Where is the diagnostic computer connector in a 94 Toyota corolla?

In a 1994 Toyota Corolla, the diagnostic computer connector, also known as the OBD-II port, is typically located beneath the dashboard on the driver's side. It is often positioned near the steering column and can be accessed by kneeling down and looking up underneath the dashboard. The connector is usually a trapezoidal shape with multiple pins inside for connecting diagnostic tools or code readers to access the vehicle's onboard computer system for troubleshooting and diagnostics.


Where is the fuse for a Toyota Avalon 95?

There are three fuse panels in the Toyota Avalon 95


Does a Toyota Avalon have a carborator?

no, the Toyota Avalon is a EFI (electric fuel injection) engine


How many valves does the 2004 Toyota Avalon have?

The 2004 Toyota Avalon has 24 valves.


How many valves does the 2005 Toyota Avalon have?

The 2005 Toyota Avalon has 24 valves.


How many valves does the 2014 Toyota Avalon have?

The 2014 Toyota Avalon has 24 valves.


How many valves does the 2008 Toyota Avalon have?

The 2008 Toyota Avalon has 24 valves.