0
What else can I help you with?
What type of oil does a 1994 Mazda b3000 v6 take and how much?
5w20 or 5w30
How much Oil do your put in a 1994 Mazada B3000 V6?
For a 1994 Mazda B3000 V6, the engine typically requires about 5 quarts (approximately 4.7 liters) of oil when equipped with a filter change. It's always a good practice to check the owner's manual for the exact specifications and to verify the oil level using the dipstick after filling. Be sure to use the recommended oil type for optimal performance.
Where is the oil filter on a MAZDA B3000 truck?
On a 2002 - it is on the drivers side of the engine toward the back. It is replaced from the top of the engine. If the engine is hot, do not try and change or be very careful
How many quarts of oil does a 94 B3000 3.0 L V6 Mazda?
It is important to maintain the levels of fluids in a vehicle. This cars engine holds between 3 and 4 quarts of engine oil.
What type of oil to use in a Mazda b3000 automatic transmission dextron3 or type f?
Simply what ever is on special @ your local parts store.
Where is the oil pump located on a 94 Mazda b3000 automatic?
It should be in the oil pan.
How much oil to put in a 2000 Mazda b3000 pickup after oil change?
4qts
Who makes engine in Mazda b3000?
Ford Motor Company
Does the Mazda B3000 truck have a non interference engine?
A Mazda B3000 truck does not have a non interference engine. These engines are designed to survive catastrophic timing failures due to lower tolerances.
Pcv valve location on a 1999 Mazda b3000?
On a 1999 Mazda B3000, the PCV valve is in one of two places, depending on the engine. On SOHC 4-cylinder engines, the PCV valve is mounted on the oil separator on the left side of the engine. On DOHC 4-cylinder engines, the valve is behind the coolant bypass hose..
What type of engine oil in saxo?
10 40w engine oil!
How much can oil reduce engine heat?
Depends on several factors. Engine type load conditions Type of oil used. Without oil your engine would melt.
