Dextron III
2004 ISUZU AXIOM/AXIOM XS
No, the 2004 model features an Asin transmission as opposed to the GM transmission that was used in 2002-2003.
how do you install a water pump on a2004 Isuzu axiom
yes i have a 2004 axiom and i have had a lot of problems with it. expensive problems.
The blower motor on a 2004 Isuzu Axiom is located under the dashboard on the passenger side of the vehicle. To access it, you may need to remove the lower dash panel. The blower motor is typically mounted near the firewall and can be identified by its round shape and electrical connector.
The weight of a 2004 Isuzu can vary depending on the specific model. For example, the 2004 Isuzu Rodeo has a curb weight of approximately 3,500 to 4,000 pounds, while the Isuzu Axiom weighs around 4,000 pounds. It's best to consult the owner's manual or manufacturer's specifications for the exact weight of a particular model.
It located under the fuel tank. There are two fuild hoses come from transmission and filter works here
Isuzu part number 8-97258-523-0(MSRP $193.86) crank sensor is on the right side(passenger) of the engine block, just behind the mount.
To replace the alternator on a 2004 Isuzu Axiom, first disconnect the negative battery terminal to ensure safety. Remove the serpentine belt by loosening the tensioner and then unbolt the alternator from its mounting bracket. Disconnect the electrical connectors and remove the old alternator. Install the new alternator by reversing the steps, ensuring all connections are secure and the belt is properly tensioned before reconnecting the battery.
Any auto parts store will sell "ATF" the bottle looks the same as a quart of oil.
To release the spare tire on a 2004 Isuzu Axiom, locate the spare tire winch access hole in the rear cargo area. Use the provided crank tool, usually found in the vehicle's tool kit, to turn the winch mechanism counterclockwise. This will lower the spare tire from its storage position underneath the vehicle. Ensure you have the necessary safety precautions in place, such as engaging the parking brake.
To replace the brake light on a 2004 Isuzu Axiom, first, open the rear hatch and locate the tail light assembly. Remove the screws or clips holding the tail light in place and carefully pull it out. Disconnect the wiring harness, then twist the bulb socket counterclockwise to remove the old bulb. Replace it with a new bulb, reassemble the tail light, and ensure it’s securely fastened before testing the brake lights.