answersLogoWhite

0

you hook it up to the white wire that comes out of your O2 sensor

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Can a 2003 Honda Civic gauge cluster fit into a 2002 Honda Civic?

Yes it can.


Can a 1995 Honda Civic si gauge cluster fit in a Honda Civic dx?

if the Honda civic dx is a 92-95 then yes.


Can I use a gauge cluster from a 2002 Honda Civic ex in a 2002 Honda Civic dx?

Yes you can.


What gauge clusters can fit into my 93' Honda civic?

your ma


Can a 2005 Honda Civic gauge cluster fit in a 2002 Honda Civic?

Yes it can with rewiring the blue and green harness plug pins.


Honda civic 02 what would make the temp gauge rise while on the highway?

The engine is getting to hot in your 2002 Honda Civic for the temperature gauge to rise above normal. The back of fan might be failing.


Where is the gas light in the Honda Civic?

Depends on what year the Civic is which you did not list. All I can tell you is that it is on the dash near the fuel gauge.


Where is gas gauge fuse for 1999 civic?

The gas gauge fuse on a 1999 Honda Civic is located in the fuse panel near the hood release. It prevents excessive current from flowing to and damaging the gauge.


What are the bulb size for a gauge cluster on honda civic 4dr ex?

24 and 74


Can a 2002 Honda Civic gauge cluster fit into a 2001 Honda Civic?

It will fit as long as you are using a cluster from a Civic with the same trim level. For example, if you have a 2001 Civic EX with a 5-Speed, you need a cluster from a 2001-2003 Civic EX with a 5-Speed.


Can you use a gauge cluster from a Honda Civic EX in a Honda Civic DX?

Yes. It is plug and play. You can use manual and automatic clusters in a manual, but you have to use automatic clusters in an automatic car.


Where do check for your RPM on a 1995 Honda Civic DX?

If you are wanting to install a Tachometer to see your RPM, the following site gives diagrams and schematics for wiring. They list many Honda related fixes etc... Hope this is helpful Either replace the Gauge Cluster with an SI/EX one or install a Aftermarket one. The RPM Signal wire is behind the Gauge Cluster on all models even if not equipped with a Tach