Not an answer - an additional question. My Toyota dealer tells me my brake fluid is dirty (on my newly-acquired 2005 Corolla), and he wants to charge me $175.00 to flush my brake fluid. That strikes me as outrageous! What is involved other than draining fluid and replacing it just like changing the oil? My (non-mechanic) husband asks how the brake fluid can get dirty in the first place. It's not running through the engine like oil does . . (Also he wants $175.00 to flush the transmission . . .)
You need to flush the power steering fluid on a 2003 Toyota Highlander every two to three years. You should check the fluid levels weekly.
After having problems with seizing wheel cylinders and other brake problems due to moisture in the hydroscopic brake fluid, I started flush clean fluid through the brake systems of my vehicles every 2 years... Have not had a single corrosion (or any brake problem for that matter) since...
Every two years under normal driving circumstances. If fluid is dirty and low, go ahead have it done.
A brake fluid flush is designed to remove moisture from the brake fluid. Most cars can be driven many years without this service, only have it done if you know for sure that there is moisture in the fluid or if in the owners' manual they suggest that you have this done at certain times.
The best answer is to ask your local Toyota dealer. The alternative answer would be to screw the cap off your tank in the engine bay that says brake fluid. The fluid on the stick should be a clear light brown. When you touch it the fluid should not be slippery, greasy, or discolored. If there is any sediment in there then change it right away and make sure to clean out the fluid reservoir. Also change your brake fluid every two years and flush out the brake lines for superior maintenance.
If you're only changing the pads, no. You only need to bleed if the hydraulic system was opened or if you wish to flush/change the brake fluid.
MOISTURE IN YOUR BRAKE FLUID. FLUSH SYSTEM WITH NEW FLUID.
yes definitely
Brake fluid can corrode your water pump. If you didn't start the engine after installing the brake fluid, then pump the reservoir empty, flush it with water and refill it with proper coolant. If you DID start it, you need to flush the whole cooling system.
Change and flush the transfer case fluid immediately.
Flush with a lot of water and call a doctor.
Most UK vehicles, the recommendation period is two years for mineral brake fluid. Silicon fluid should not need changing as it does not absorb water.