answersLogoWhite

0

You can totally bypass the old amps on each Bose speaker and re-route the wires directly to the old speakers or new ones. The only problems I had was ground looping with adding an additional amp for a sub in the trunk.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you install rear side speaker infiniti g35?

To install rear side speakers in an Infiniti G35, first, remove the rear side panel by unscrewing any fasteners and gently prying it away from the clips. Disconnect the old speaker by unplugging the wiring harness and removing the screws holding it in place. Install the new speaker by securing it with screws and reconnecting the wiring harness. Finally, reattach the rear side panel, ensuring all clips are properly seated.


How do you install speakers into a 94 Honda Accord that has a srock wiring harness?

You can buy a speaker harness. An adapter that connect the positive and negative from the speaker into the stock harness.


What is the stereo wiring diagram for 2004 Kia Spectra?

Try these out ...... Radio 12v pink + radio harness Radio Ground black - radio harness Radio Ignition pink + radio harness Radio Illumination blue/black + radio harness Factory Amp Turn-on N/A Power Antenna green/black + radio harness LF Speaker +/- blue/red - yellow/black +,- radio harness RF Speaker +/- black - yellow +,- radio harness LR Speaker +/- brown - white +,- radio harness RR Speaker +/- green/orange - blue/orange +,- radio harness


What is a Chevy blazer 2001 stereo wiring color code?

Accesory DARK GREEN (+) RADIO HARNESS Ground BLACK (-) RADIO HARNESS Illumination GRAY (+) RADIO HARNESS Dimmer VIOLET/WHITE (-) RADIO HARNESS LF Speaker (+) TAN LF Speaker (-) GRAY RF Speaker (+) LIGHT GREEN RF Speaker (-) DARK GREEN LR Speaker (+) BROWN LR Speaker (-) YELLOW RR Speaker (+) DARK BLUE RR Speaker (-) LIGHT BLUE Steering Cntrls YES Speed Cntrl YES Radio Security YES


What are the stereo wire color codes for a 2002 Jaguar S type?

brown/green + radio harness Radio Ground black - radio harness Radio Ignition white/red + radio harness Radio Illumination blue (dimmer) + radio harness LF Speaker +/- white/black - yellow/black +,- radio harness or amp RF Speaker +/- white/red - yellow/red +,- radio harness or amp LR Speaker +/- white/blue - yellow +,- radio harness or amp RR Speaker +/- white - yellow +,- radio harness or amp Lee Curle Owner- Custom Car Audio, Newton,KS


Dose any one know the sterio wiring diagram for a 1995 mercury grand marquis?

Battery GREEN/YELLOW (+) RADIO HARNESS Accesory YELLOW/BLACK (+) RADIO HARNESS Ground BLACK/LIGHT GREEN (-) RADIO HARNESS Illumination LIGHT BLUE/RED (+) RADIO HARNESS Dimmer BLUE/RED (+) RADIO HARNESS Power Antenna AMP=BLUE LF Speaker (+) ORANGE/LIGHT GREEN LF Speaker (-) LIGHT BLUE/WHITE RF Speaker (+) WHITE/LIGHT GREEN RF Speaker (-) DARK GREEN/ORANGE LR Speaker (+) GRAY/LIGHT BLUE LR Speaker (-) TAN/YELLOW RR Speaker (+) BROWN/PINK RR Speaker (-) ORANGE/RED


How do you get speaker to work if the harness is cut?

Repair the broken connections.


I plan on putting in a aftermarket stereo is there anything that you need to do The new headunit will be 4 channel with 52 watts per channel is there any special wiring for the rear speaker 93 maxima?

Best thing to do is to purchase a wiring harness for your car and stereo. They are readily available on eBay from $15. Just search for 'wiring harness'.


How do you fix speakers that go on and off?

sounds like a short. if all or some speakers do it, it is probably in the radio, or the wiring harness. if only one speaker does it, it is the speaker or the wiring to that speaker.


What are the radio color codes for a 1999 Blazer?

buy a aftermarket wiring harness if your factory harness is cut good luck use a test light or meter to find your constant power and ignition then trace speaker wires the positives on the rear speakers is dark collered wires little hint to limit your problems


I'm installing new speakers in my car, what can I do to prevent vibration problems?

To prevent vibration issues with car speakers, make sure the housing that you are putting the speaker boxes in are solid and well connected. Also, having acoustical material in the area surrounding the speaker helps as well.


Speaker size for a Dodge Intrepid?

front 6 1/2'' back 6x9 infiniti tweetwers 1''