0
What else can I help you with?
How do you change Rear brake pads on 2004 Nissan Maxima?
change rear brakes on a 2004 Nissan maxima
How do you bleed brakes on a 2003 Nissan Maxima?
http://www.innerbean.com/housecor/bleed_brakes.html
Does a 1992 Nissan Maxima have 4 wheel disc brakes?
some do 4 wheel disc brakes came on the se model
How do you change the rear brakes on a 1996 Nissan Maxima?
Maxima comes with Auto adjustments. All you need to adjust is brake pedal free movement.
1992-1994 maxima rear disc brakes work on a Nissan sentra 1991-1994?
no because the maxima is a 5 lug and the sentra is 4 lug
What is the bleeding pattern for the brakes on a 92 Nissan Maxima?
i like to bleed them from rear passenger to front driver then rear driver to right front but if its abs brakes i was told to bleed both back then both front
Changing rear brakes on a 2002 N16 Nissan Pulsar?
To change the rear brakes on a 2002 N16 Nissan Pulsar, first, lift the vehicle and secure it on jack stands. Remove the rear wheel, then unbolt the caliper and slide it off the brake rotor. Replace the old brake pads with new ones, ensuring to compress the caliper piston if necessary. Reassemble by reattaching the caliper, replacing the wheel, and lowering the vehicle back to the ground.
How do you push the brake cylinder back in on the rear brakes of a 1987 Nissan 200SX?
If the brakes are disk on the rear they can't be push or pressed in they have to be screwed in by turning the piston clock wise try this it should work. That is what I did on my 1994 Nissan Maxima becareful not to damage the rubber dust boot on the piston.
You got a 95 Nissan Maxima and the rear brakes on the driverside are not working What could be the problem?
If there are disc brake, it could be frozen caliper slides or a frozen caliper piston. If they are drum brakes, it could be a frozen wheel cylinder.
How do you depress the piston on the rear brakes to replace the pads on a 2002 maxima?
you take a pair of plyers or a caliper kit from autozone and turn in the calipers. You have to turn them clockwise to make them go back in. do not try and compress them in, you will damage them.
How do you compress the rear brakes on a 1997 Nissan Maxima?
dont compress, take brake caps off and it's self adjusting so turn it back clockwise,. behind the brake pads. For Rear Brakes: Use either a needle-nose pliers (difficult) or a "brake tool" (available at any autoparts store) to rotate the piston. For Front Brakes: Just use a C-clamp to (gently!!!) push the piston inward. The Piston in the rear brake caliper screws in. There are two holes to insert a tool into to rotate the piston. Get the special tool at any auto parts store, It'll be worth the $4 or $5 dollars.
Why do your front brakes lockup on your 91 Nissan pickup truck?
brake calibers might need replacing,the pistons might be getting stuck,its easy to replace.
