Driver and passenger side coming down from motor can be seen from under hood coming from exhaust manifold not the ones under car running straight
There are four oxygen sensors for this vehicle - two for each bank of cylinders. They are located on the exhaust pipes just ahead of and after the catalytic converters - sometimes referred to as "upstream" and "downstream" of the catalytic converters. Bank 1 refers to the bank of cylinders where cylinder number is located, which is the left or driver's sidde. Sensor 1 is located ahead of (closer to the engine) the catalytic converter. Sensor 2 is located after the converter. The same goes for bank 2.
Those are the oxygen sensors in the exhaust above the catalytic converters.
No Bank 1 is the passenger side of the engine in your Ford Expedition , Bank 2 is the drivers side Sensor 1 for both sides of the engine are before the catalytic converters ( upstream ) Sensor 2 for both sides of the engine are after the catalytic converters ( downstream )
There are 2 catalytic converters on a V8 2002 Toyota Tundra. Bank 1 is the manifold and cat on the drivers side and bank 2 is the manifold and cat on the passenger side. Sensor 1 is the sensor on the exhaust manifold before the catalytic converter. Sensor 2 is the sensor located after the cat converter. Bank 2 Sensor 2 is the sensor located after the catalytic coverter on the passenger side.
In the Jaguar X-Type 2.5, the O2 sensors are located in the exhaust system. Bank 1 Sensor 2 is positioned downstream of the catalytic converter on the side of the engine that corresponds to cylinders 1, 2, and 3. Bank 2 Sensor 2 is similarly located downstream of the catalytic converter on the side that corresponds to cylinders 4, 5, and 6. These sensors monitor the efficiency of the catalytic converters and help manage emissions.
1 oz.
heated exhaust gas oxygen sensors ( HEGO sensors ) or just oxygen sensors on a V6 engine , Bank #1 is the passenger side , Bank # 2 is the drivers side # 1 sensors are close to the engine , before the exhaust gas passes through the catalytic converters ( # 1 sensors are used for adjusting air / fuel ratio ) # 2 sensors are in the exhaust after passing through the catalytic converters ( downstream ) they are called catalyst monitors and monitor the efficiency of the catalytic converters
It does not have 3 catalytic converters. It only has 1.
Bank 1 Sensor 2 is located on the Right Hand Bank - After the catalytic converter. Meaning its on the bank closest to the firewall and after the catalytic converter. Call any Mitsubishi dealer and they will tell you where its @.
On a Ford Expedition : Bank1 is the passenger side of the engine Bank 2 is the drivers side of the engine
1
There should be 1.