Passenger side of engine compartment, firewall side of engine.
bank 1 sensor 1 2002 on toyots sienna
On the exhaust pipe next to the firewall. This is the one you change for a OBD code P01135.
Bank 2 is the side of the engine that faces the front of the vehicle, sensor 1 is the upper sensor, it is in the exhaust manifold
Totally Tested AutoTrader-com - 2012 Toyota Sienna 1-6 was released on: USA: 1 March 2013
Code P1130 Means air/fuel sensor circuit range/performance (bank 1 sensor 1)
I HAVE BEEN TO PROGRAM 2 REMOTE CONTROL FOR TOYOTA SIENNA 2002 BUT I CAN"T DO THAT. WHEN I ACTIVE 1 Y UNDER ONE NO ACTIVED
The Exhaust OCV (Oil Control Valve) bank 1 on a 2007 Toyota Sienna is located on the engine's cylinder head, specifically on the driver's side. It is positioned near the rear of the engine, close to the exhaust manifold. To access it, you may need to remove some components, such as the engine cover or intake manifold, depending on the repair procedure.
hi i have 2004 toyota sienna xle limited and the tailgate door not opening it is opens 1 inch then it is shots back i dont know what shod i do
Engine cylinders # 1 and # 4 are misfiring
Bank 2 is the sensor opposite from the number one cylinder, and on your vehicle is the front of the engine. Sensor 1 is the first oxygen sensor you come to from the engine in the exhaust pipe.
Step 1 is to be sure you get the right replacement wiper blades. The 2000 Toyota Sienna takes 24" driver side, 18" passenger side replacement windshield wiper blades on the front and a 17" replacement rear wiper blade. Step 2: As far as installation, the replacement wiper blades will come with simple-to-follow, step-by-step, illustrated instructions.
Cylinder location: 1 3 5 2 4 6 Front of engine