The ecm is located on passenger side of vehicle. Remove under cover of instrument panel and lower piece of instrument panel(piece right below glove box), has four connectors going into it.
In the 1992 Lexus SC 400, the Engine Control Unit (ECU) is located under the dashboard on the driver's side. Specifically, it can be found behind the kick panel, which may require removal for access. This placement helps protect the ECU from environmental factors while still allowing it to efficiently manage engine functions.
location of the ecu on 1993 Lexus LS400
Computer Card? What are you talking about? There is no computer card in this vehicle. It has a ECU or computer as it is sometimnes called. Without the ECU the car will not start, as the ECU controls the fuel pump relay and fuel/air mixture. I doubt you can. The vehicle is completely depenant upon that "brain" for everything.
There is a fuel pump relay (or circuit opening relay) attached to the ECU (engine computer) located behind the dash.
engine computer is located under the dashbord, to the left of the steering column. The ECU and the ABS computer are mounted in the same carrier, the ABS computer is outbord of the engine computer. the engine computer is the one closest to the kickpannel.
the 1994 Honda accord has an obd2 ecu.
Check power and ground betwen the ecu an the computer link connrctor
The fan on a 1995 Lexus SC 400 is powered by the engine's cooling system, specifically by an electric motor. This motor is activated by the engine control unit (ECU) based on the engine temperature and the demands of the air conditioning system. In some cases, a viscous fan clutch may also be used for the mechanical fan, which engages when the engine reaches a certain temperature.
electronic control unit (ecu) that would be the computer for your engine
With a diagnostic computer.
To change the ECU in a Lexus IS300, first disconnect the negative battery terminal to prevent electrical shorts. Locate the ECU, typically found under the passenger side dashboard or in the engine compartment, and remove any covers or connectors. Carefully unplug the old ECU and replace it with the new unit, ensuring all connectors are securely fastened. Finally, reconnect the battery and start the vehicle to verify that the new ECU functions correctly.
dosnt have an ecu