it is on under the truck on the exhaust pipe right under the drivers door
Yes, but only if they are both the same configuration, i.e. both 4 cylinder or both V6
on the side
Its up in under there somewhere
yes
The 1994 Toyota pickup truck starter mounting bolts can be found on the head of the starter. There will be three mounting bolts.
Header is getting red
REMOVE THE PASENGER FENDER AND IT IS OBVIOUS... NOTHING TECHINCAL.
Just unplug the electrical connector and then unscrew the oxygen sensor out of the exhaust pipe.
if its a 3.0 v6 it has 150Hp and around 160 of torque
air con on hzj79 not getting power were are the fuses?
To change the oxygen sensor on a 1994 Toyota T100, first, locate the sensor, which is typically found on the exhaust manifold or downpipe. Disconnect the electrical connector and use a socket wrench to unscrew the old sensor. Before installing the new sensor, apply anti-seize compound to the threads, then screw it in and reconnect the electrical connector. Finally, start the engine to ensure it's functioning properly and check for any warning lights.
It is screwed into the exhaust, behind the engine.