The starter relay is located inside the engine compartment, on the left/passenger side wall (to left of the firewall) attached by one screw to the wall.
Change a starter on a 1988 Toyota Cressida
Driver side in the cab it's located behind the kick panel
On a 1988 Nissan Pickup, the starter relay is typically located in the engine compartment, near the battery. It is often mounted on the inner fender or near the fuse box. To access it, you may need to remove the cover for the fuse box or look for a small rectangular relay that is labeled accordingly. Always consult the vehicle's service manual for specific details and diagrams.
Mounted to the top of the starter
It's behind the passenger-side kick panel. It's below the dash and in front of the door.
AutoTrader.com
Remove the positive battery cable from your 1988 Chevrolet 1500 pickup truck battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
You just unscrew it.
To check the fuel pump on a 1988 Toyota pickup, first ensure the ignition is off and locate the fuel pump relay in the fuse box. You can test the pump by bypassing the relay with a jumper wire to see if the pump activates. Additionally, listen for the pump's humming sound when the ignition is turned to the "ON" position (without starting the engine). If there are no sounds or fuel pressure at the fuel rail, the pump may need to be replaced.
The starter relay on a 1988 Acura Legend is located in the under-hood fuse/relay box. This box is typically situated near the battery, on the driver's side of the engine compartment. You can identify the starter relay by consulting the diagram on the cover of the fuse box, which will indicate its specific position.
2 bolts hold it on
The starter relay is on the driver's side fender behind the battery.