On a 1987 Toyota MR2, the PCV (Positive Crankcase Ventilation) valve is located on the engine's valve cover. Specifically, you can find it near the rear of the engine, typically on the driver's side. It's connected to a hose that leads to the intake manifold. To access it, you may need to remove some engine covers or components for better visibility.
Should be located in the removable housing at the engine end of the upper radiator hose
what is the sparkplug gap on a 1987 toyota corrola?
No , the 1.6 liter 4 cylinder engine in a 1987 Toyota MR2 is not an interference engine
in the tank
In a 1987 Toyota MR2, the fuel pump relay is located in the engine compartment, near the fuse box. It is typically mounted on the driver's side, close to the firewall. You may need to consult the vehicle's service manual for precise diagrams or further details on identifying and accessing the relay.
1-3-4-2
The idle air control valve (IACV) on a 1986 Toyota MR2 is typically located on the throttle body assembly. It's mounted on the side of the throttle body, which is situated between the air intake and the intake manifold. To access it, you may need to remove the air intake duct and possibly some surrounding components for better visibility and access.
On a 1989 Toyota MR2, the AC recharge valve is located on the low-pressure side of the air conditioning system. You can find it on the accumulator, which is typically mounted near the firewall on the passenger side of the engine bay. The valve is usually covered with a plastic cap and may be labeled for identification. Always ensure the system is properly serviced and follow safety guidelines when handling refrigerants.
In a 1987 Toyota MR2, the radiator is located at the front of the car, behind the front bumper. It is positioned vertically and is accessible by removing the front grille and possibly some panels. The radiator is responsible for cooling the engine coolant, ensuring optimal engine temperature during operation.
The Toyota mr2
by the oil dip stick
that is the oxygen sensor on the exhause manifold.