To change the transmission filter on a Mitsubishi Mirage, first ensure the vehicle is on a level surface and secure it with jack stands. Drain the transmission fluid by removing the drain plug, then detach the transmission pan to access the filter. Replace the old filter with a new one, ensuring the gasket is in good condition, and reassemble the pan and drain plug. Finally, refill the transmission with the appropriate fluid and check the level.
If you check the gearbox code on thisbox and find its F5M41 then the drain plug will be on the diff case..usually its quite a large one 24/to 34mm in size ..
where is the air conditioner drain on a 2001 Mitsubishi Galant
Passenger side, almost directly to the left of the front passenger wheel. Sticks down at a slight angle. The drain plug is to the left of it sitting vertically on the oil pan.
The thermostat on a 1997 Mitsubishi Mirage is located on the engine, typically at the end of the upper radiator hose where it connects to the engine block. To access it, you may need to remove the hose and the thermostat housing, which is usually secured with bolts. Make sure to drain some coolant before proceeding with the removal to avoid spills. Always consult the vehicle's service manual for specific instructions and torque specifications.
The Mitsubishi air conditioning drain is located near the bottom of the firewall in the engine compartment. The drain is on the passenger side of the firewall.
draining a radiator of a mitsubishi space wagon
The engine coolant drain plug on a Mitsubishi V6 engine is located on the bottom of the radiator. This allows for coolant to be quickly and easily drained.
On the oil pan
It is 25 mm socket.
all drain plugs are located at the lowest point of the oil pan.
again on the oil pan