Under the timing belt cover, sensor runs of tooth wheel on timing belt crank cog. job and a half.
Pull aff ac bracket and the wire will lead you there
where is the engine number on a 1997 daewoo nubira
On a 2001 1.6 Daewoo Nubira DOHC engine, the timing marks are located on the crankshaft pulley and the timing cover. You will find a mark on the crankshaft pulley that aligns with a reference point on the engine block. Additionally, there are marks on the camshaft gears that should align with the timing cover when the engine is at the top dead center (TDC) of the first cylinder. Always ensure the engine is at TDC before making any timing adjustments.
It's located on the firewall up top just behind the engine.
yes
Yes
According to the Gates website ( they make timing belts etc. ) the ( 2.0 liter engine ) in a 2002 Daewoo Nubira ( is an interference engine )
Back of the engine block. 3 bolts to release and ridiculously hard to reach.
i Have a nubira II premium M.2000 1.5Ltr and the Map Sensor is located just under the Wind screen wipers inside the engine compartment, to the left of the Coil
What is the cylinder head torque specs for a 2001 daewoo nubira 2.0 litre engine and what is the proper torque order
The Engine Control Module (ECM) on a 2001 Daewoo Nubira is typically located under the dashboard on the driver's side, near the steering column. It may be necessary to remove some panels to access it. Always refer to the vehicle's service manual for specific location details and procedures.
The exhaust manifold on the 1998 Daewoo Nubira is located on the engine, typically mounted on the cylinder head. It collects exhaust gases from the engine's cylinders and directs them to the exhaust system. Accessing it usually requires removing engine covers or other components, depending on the engine configuration. Be sure to follow service guidelines for safety and proper disassembly.