EGR valve is allways connected to the exhaust pipe. It goes to the intake. It allows exhaust to flow into intake to reduce N.O. It has a vaccuum hose connected to it. The hose may be connected to a solenoid. On 94 and up check for ohms, if open replace. If this solenoid is bad you will fail smog every time. EGR valve is bolted to the manifold on passenger side, just underneath the carburetor. There are three hex head screws, requires 10mm socket.
where is the EGR valve on a 1989 mazda b2200
No
It would depend on the truck's condition. The B2200 short bed truck in excellent condition would be about $1,650. The B2200 long bed would be around $1,750 in excellent condition.
Gap is 0.031 or 31thousandths. your truck has the 2184 cubic inch engine.
where is the ignition module located on a 1988 Mazda b2200
.032
17 gallon
Mazda made a b2200 and b2600 truck in 1989.As for performance the engine is rated at 85hp or so and really just a mpg truck not a power house for dragging trailers or too much weight.The truck is great for general use,and driving and hauling resonable things in the bed with ease over all.
How do you reset computer on 1989 Mazda B2200 PU truck? We seem to be having a key turn loop on computer and after so many starts the truck starts stalling out. Have cleaned computer 2 times now and problem seemed to go away but after similar time period usually a week the problem started again.
yes they do.use the b2000 cam caps and use the b2200 rocker arms,rocker shafts and shaft springs
The current value for a 1989 Mazda truck in good working condition is $1,599.
All mazda b series with a b2000 or b2200 are a NON interference engine.So in short if your timing belt broke it will not damage the engine.