0
What else can I help you with?
Where is the PCV valve located on a 1995 Isuzu Rodeo?
where is the pcv valve located on a 1995 Isuzu rodeo v6 3.2l
Where is the egr valve located on 95 Isuzu rodeo?
The EGR valve on a 95 Isuzu Rodeo is located on the back top of the engine. It resembles a cylinder.
Where is the shift lock solenoids located on a 1999 Isuzu Rodeo?
The shift lock solenoids are located on the valve body on a 1999 Isuzu Rodeo. There are two shift solenoids.
Where is the ac low-pressure valve located in the engine compartment of a 1996 Isuzu Rodeo?
The AC low pressure valve on a 1996 Isuzu Rodeo is located in the back of the engine compartment. The valve is on the larger of the two hoses that run from the evaporator to the compressor.
Where do you put the oil in a 1993 Isuzu Rodeo?
The oil in a 1993 Isuzu Rodeo is put into the reservoir that is located on top of the valve cover. There is a cap that has to be rotated to remove it.
What is the location of the expansion valve for a 2002 Isuzu rodeo sport 4cl?
probably on the firewall, follow the ac lines to it.
Isuzu rodeo valve noisehow to adjust valves on a 3.2?
How do you adjust the valves on a 1995 isuzu Rodeo 3.2
Where is the AC expansion Valve located on a 2000 Isuzu Rodeo L V6 DOHC SE?
The AC expansion valve on a 2000 Isuzu Rodeo L V6 DOHC SE is typically located inside the evaporator case, which is situated behind the dashboard on the passenger side of the vehicle. To access it, you may need to remove the dashboard or certain components of the HVAC system. It’s often easier to access the valve when the vehicle is lifted and the under-dash panels are removed. Always refer to a repair manual for specific instructions and safety precautions.
Where is the PCV valve located on a 1998 Isuzu Rodeo?
The PCV is screwed into the front of the intake manifold, top right and has a hose coming out of it.
Where is the PCV valve located on an Isuzu rodeo 2004?
It does not have one (the "valve" that is). I belive 1998 and newer do not. My 2001 Isuzu Rodeo does not. It does not because it is too new. However, it does have a PVC system with the breather tube coming from the crankcase to the valve cover. From there fresh air is taken from the air duct and mixed with the crankcase vapors. Then it is sent to the TBI Throttle Body system and burned up.
Where is the PCV valve located on a 1995 Isuzu rodeo 3.2 lr v6?
The PCV will be located somewhere on the engine block. It will have a wire attached to it and it will be on the top of the crankcase, covering the valves.
Where is the idle control valve located on my 2002 Isuzu rodeo?
The idle control valve on a 2002 Isuzu Rodeo is typically located on or near the throttle body, which is situated on the intake manifold. To access it, you may need to remove the air intake duct and possibly some other components. It's advisable to consult a repair manual for detailed instructions and diagrams specific to your vehicle model.
