The fuel pimp is in the gas tank. it is accesible by removing the center row of seats or if a captains chair only the one on the passenger side.remove the screws on the door threash hold trim lift up carpet on the north American there is a cutout behind the passenger seat in the sound board, lift that out and you will see a cover plate, unscrew that, now your down to the gas tank. the metal plate with the hoses and wires has the pump and the sender unit on it.
how to reset a fuel pump on a Mazda MPV van 2000
on an '01 Mazda MPV the fuel pump is on the left side of the vehicle. older MPVs have it on the right
Mounted on top and inside the fuel tank.
in the pump, which is in the tank.
inside the gas tank
The fuel pump is mounted on top and inside the fuel tank. The filter may be integrated into to fuel pump or it will be located between the fuel tank and the engine.
Fuel pump is in the gas tank,access from under the carpet behind the passenger seat
Fuel filter on Mazd MPV is located in the fuel tank.
I have a 90 MPV and also the shop manual (a real one) and I did not find a reset button in the manual or the vehicle. The later model MPV may have one.
1990 Mazda MPV with 3.0 (V6) engine. The fuel pump is located under the middle seat. You have to remove the middle seat then lift up the carpet to access the access plate. Remove the access plate bolts to access the electric in-tank fuel pump.
Easy pull passenger side carpet ,., unscrew 4 nuts ,., remove metal shield ,., now you will see ,., the PCM ,., On the left ,., a green relay
How do you replace a fuel injector on a 2001 Mazda mp