On a 2001 Toyota Sequoia, the fuel pump is located on top of the fuel tank. The fuel pump is powered by the EFI fuse and EFI relay.
In the fuel tank
To access the fuel pump on a 2004 Toyota Sequoia, you typically need to remove the rear seats and the floor covering to reach the fuel pump access panel located above the fuel tank. Unscrew the panel and carefully disconnect the fuel lines and electrical connectors before removing the fuel pump assembly. If you prefer, you can also drop the fuel tank for easier access, but this is a more involved process. Always ensure to relieve the fuel system pressure before starting any work on the fuel pump.
Mounted on top and inside the fuel tank.
It's not a trick question. It's a fuel pump relay.
Mounted on top and inside the fuel tank.
To change the water pump on a 2001 Toyota Sequoia, first disconnect the battery and drain the coolant. Remove the serpentine belt and the timing belt (if applicable) to access the water pump. Unbolt the water pump from the engine block, clean the mating surfaces, and install the new pump with a new gasket. Finally, reassemble everything in reverse order, refill the coolant, and check for leaks.
Mounted on top and inside the fuel tank.
The relay supplies power to the fuel pump. the relay clicks on when key is turned to 'on' to power the pump.
Your 2001 Toyota 4 runner will not start even after changing the VSV and fuel pump because of another mechanical problem. Consider taking it to a mechanic.
http://groups.msn.com/Sorensonbrian/fuelfilter.msnw follow this DIY
The fuel pump for a 1979 Toyota Pickup is in the fuel tank. Drop the fuel tank and unbolt the fuel pump from the top for a 20R engine.