0
What else can I help you with?
Need help in locating IAT sensor on a 91 integra ls 2dr?
The IAT sensor, or intake air temperature sensor, is located on the tubing the of intake on a 1991 Acura Integra. This sensor reports the temperature of air coming into the engine directly to the ECU.
Where is the intake air temperature sensor in acura integra 92?
The IAT is located on the intake manifold right behind the Fuel Rail
Where is the iat sensor on an 99 Acura Integra ls?
The intake air temperature (IAT) sensor on a 1999 Acura Integra LS is located in the intake manifold, specifically on the intake air duct, near the throttle body. It is typically a small cylindrical or rectangular component that is plugged into the air intake system. To access it, you may need to remove the air intake hose or duct. Always ensure the engine is cool and disconnected from the battery before attempting to locate or replace the sensor.
Where is the iat sensor on a Acura Integra 1.8L?
left rear top of the engine on the intake manifold mounted and held in by screws
Where is the intake air temperature sensor plug located on the 1997 Acura RL?
The 1997 Acura intake air temperature sensor is located on the air filter housing. The sensor will be on the right hand side of the air filter housing.
Where is the IAT sensor plug in a 2000 Acura Integra LS?
Driver side if intake manifold last cyl. up on top
Where is map sensor on Acura Integra?
The map sensor on an Acura Integra is typically located on the intake manifold, near the throttle body. It is mounted to the manifold and connected to a vacuum source. Depending on the specific year and model of the Integra, it may be positioned differently, so consulting the vehicle's service manual can provide precise details for your model.
Where is the oil temperature sensor located on a 1991 acura integra?
it is located on the firewall side of the engine to the left of the oil filter
Where is the oxygen sensor located on a 1995 Acura Integra?
on the header
Where is the IAT sensor located at for a 1990 Acura Integra ls?
The sensor is located on the intake manifold or air plenum. It is removed and installed in straightforward fashion; disconnect the wiring connector and remove the mounting screws. Remove the sensor.
IAT sensor 1999 Acura TL 3.2?
The IAT sensor on a 1999 Acura Tl is located inside the air box. The sensor reads the temperature for the air that enters into the engine through the intake system.
Ecu error code 17 in 1988 Acura Integra?
The ecu code 17 in the 1988 acura integra is for the VSS (vehicle speed sensor). Hope this helps you.
