On the exhaust pipe between the catalytic converter and exhaust. It is basically between the rear wheels. It will be at the top of the exhaust pipe at the 12 o'clock position.
The rear track of the 2002 Mazda MX-5-Miata is 4 ft. 8.7 in. (56.7 in.).
The 2002 Mazda MX-5-Miata has rear wheel drive.
On a 1999-2005 model Mazda Miata the camshaft position sensor is located on the valve cover towards the rear of the engine (closest to the firewall). It has one 3-pin connector connected to it and one 10mm bolt to remove the sensor
The first O2 sensor is located just below the header/exhaust manifold, and can be seen just below the header's heat shield. It is most easily accessed by removing the driver's side wheel. The second O2 sensor is located after the catalytic covertor between the rear wheels at the 12 o'clock position. Because Miata engines typically run rich, it is not uncommon for the first O2 sensor to die early.
The O2 sensor on a 1992 Mazda Miata is located on the exhaust manifold, just before the catalytic converter. It's positioned on the top side of the exhaust system, making it accessible from the engine bay. If you are looking for the rear O2 sensor, it can be found on the exhaust pipe after the catalytic converter.
The speedometer signal comes form the rear axle speed sensor on top of the rear axle.
the speed sensor is located at the rear of the transaxle behind the driveaxles.
yes, the Mazda miata is rear wheel drive
It is on top of the center of the rear axle.
on top of the rear differential
The crankshaft position sensor is on the top rear of the transmission bell housing.
It is hidden behind a plastic shield underneath the car, just before the rear, passenger side tire.