IT IS LOCATED ON THE DRIVERS SIDE IN LINE WITH THE LOWER RADIATOR HOSE COMING FROM THE DRIVERS SIDE, BOTTOM ON THE RADIATOR. IT IS IN A SOMEWHAT ROUND HOUSING.
The PCV valve on a 1987 Toyota Corolla FX16 is located behind the alternator. It is under the intake manifold.
To replace the thermostat on a 1987 Toyota Corolla, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant by removing the lower radiator hose or the drain plug. Next, remove the thermostat housing bolts, take out the old thermostat, and clean the mating surfaces. Install the new thermostat with the spring side facing the engine, reassemble the housing, and refill the coolant before reconnecting the battery.
no
In a 1987 Toyota Van, the thermostat is typically located in the engine compartment, near the engine block. It is situated at the end of the upper radiator hose, where it connects to the engine. To access the thermostat, you may need to remove the upper radiator hose and the housing that covers the thermostat.
Should be located in the removable housing at the engine end of the upper radiator hose
0.043 in.
I did an 88 recently. facing the engine it is on the left. Follow the hose from the radiator.
The Thermostat is located to the pasenger side of the Valve cover, just folow your upper radiator hose back and it will be in the housing that the hose conects too.
The 1987 Toyota Corolla came in two door and four door models, a multitude of colors and a 4 speed manual transmission and a 4 cylinder engine.
Motorweek - 1987 2009 Toyota Corolla 27-18 was released on: USA: 4 January 2008
what is the correct torque for a Toyota Corolla engine - 4E-FE, 1st generation engine?
A person should have a diagram when they are working on a carburetor of any car. A diagram for the 1987 Toyota Corolla carburetor can be found in the maintenance manual and the repair manual.