Left side of the motor right near the distributor and air intake tubing
one is located at the thermostat housing. the other is in the bottom of the radiator.
Depends, I know they have 2.0 and 2.1 for the 91 prelude.
show me picture of where the water pump is located on 1991 Honda prelude si
How can I check the ENGINE COOLANT TEMPERATURE (ECT) sensor on my 1991 HONDA PRELUDE SI 2.1L
You can't aprrently on a hyrdraulic clutch, which these have that adjust automatically.
It is located on the top radiator line where it connects to the block. There should be 2 bolts that secure it to the block.
yes they are the same the 2.0 l4 fuel injected
To change the thermostat in a 1991 Honda CRX Si, first ensure the engine is cool, then drain the coolant from the radiator. Remove the thermostat housing by unbolting it, and take out the old thermostat. Install the new thermostat with the spring side facing the engine, reattach the housing, and refill the cooling system with coolant. Finally, run the engine to check for leaks and ensure proper operation.
It does not.
look for the upper radiator hose and fallow it back to the engine there you will see the water neck unbolt that and it will be right there.
on the 2.0 si and the 4w si
?timing marks for 2.0 prelude 89