I added, and will answer the above question to help others not make the same mistake I just did when reading other Q&A Forums. I am not sure about any other vehicle other than my exact Make and Model, but here is the deal: I own a 2000 Toyota 4Runner Limited with a V6. The plastic belt cover says "3400 Four Cam 24" on it. Don't listen to anyone who tells you the thermostat housing is on the engine side of the top radiator hose. It is actually on the engine side of the bottom radiator hose. Just three 10mm nuts. Just make sure when replacing the thermostat you have the thermostat vent hole (on the thermostat face) in the 12 noon position. And replace the gasket of course. Good luck!!!
How do you turn off running lights on 2000 Toyota 4runner?"
if you have the correct tools and professional help it should work.
Yes, it should fit perfectly.
The maximum tosing capacity of the 2010 Toyota 4Runner is 2000 lbs..
No.
WHEN SHOULD TIMING BELT BE CHANGED ON A 2000 TOYOTA 4RUNNER SR5? talktoenock@comcast.net
A 1991 Toyota 4runner is bigger than a 1990 4runner
The thermostat on a 1991 Toyota 4Runner is located on the engine block. It can be found by following the large hose coming from the radiator.
you have look for the dashboard unions behind the thermostat control under the compartment
To replace the thermostat on a 1991 V6 Toyota 4Runner, first, ensure the engine is cool, then disconnect the negative battery terminal. Drain the coolant from the radiator and remove the upper radiator hose to access the thermostat housing. Unbolt the thermostat housing, remove the old thermostat, clean the mating surfaces, and install the new thermostat with a new gasket. Finally, reassemble everything, refill the coolant, and check for leaks.
It is probably your spark plugs misfiring.
1.1 mm or .043 in