0
What else can I help you with?
Where is the signal and hazard light flasher on a 1990 Isuzu Pickup?
on a 1989 Isuzu pickup you need to take out the left speakerto get to the signal and hazard light flasher ..The control box for the flashers and turn indicators is all contained within the steering column. Not the easiest to get to.
Isuzu wiring diagram?
radio 1990 isuzu pickup
What is the psi on the 1990 v6 Isuzu pickup fuel pump?
what's the pis of the 1990 v6 isuzu pickup fuel pump
How much is a 1990 Isuzu pickup worth?
nada.com
How do you rebuild carb on 1990 Isuzu pickup 2.3 ltr?
Take it to mechani
Why do the antibrake and brake light stay on my 1990 Isuzu pickup tuck?
there is asensor on the rear diff...replace that and you should be ok
I need spark plug firing order for Isuzu pickup 1990 and diagram if possible?
try www.autozone.com an look in the specs.
Tire size 1990 Isuzu pick up?
I am amazed at how many tire size questions are here...anyhow, if your 1990 Isuzu is the standard 1/2 ton pickup then it came with an OE size of P195/75R14. I hope this has helped you. COO of TireTyre.com
What is the fuel tank capacity on a 1990 Isuzu 4x4 Pickup?
The fuel tank capacity for a 1990 Isuzu 4x4 Pickup is approximately 18.5 gallons (70 liters). This capacity may vary slightly depending on the specific model and configuration, but 18.5 gallons is the standard for most versions of this vehicle. Always refer to the owner's manual for precise specifications.
Where is the ignition control module on your 1990 Chevy k2500 pickup?
it's underneath the rotor in the distributor. you have to take the distributor out to change it.
What parts are interchangeable for a 1990 Isuzu pickup?
For a 1990 Isuzu pickup, several parts can be interchangeable with other models from the same generation, particularly those from the Isuzu Trooper and Rodeo. Components such as engines, transmissions, and suspension parts may be compatible. Additionally, some body parts like doors, fenders, and hoods from other Isuzu models from the late 1980s to early 1990s can also fit. Always verify specific part numbers and consult a parts expert for the best match.
Installation clutch cable 1990 Isuzu pickup?
To install a clutch cable on a 1990 Isuzu pickup, first, disconnect the negative battery cable for safety. Then, remove the old clutch cable by detaching it from the clutch pedal and the transmission. Install the new cable by threading it through the firewall and connecting it to the pedal and transmission, ensuring proper tension. Finally, adjust the cable if necessary and reconnect the battery.
