0
It turns off left. But it is almost impossible to do without an impact wrench. To get it off without impact tools you need to find some way to keep the engine from rotating as you turn the bolt. That bolt is in there pretty tight and almost any method you try to hold the crank pulley is going to cause damage when you try to crank that bolt loose. Suggest you check with a local rental outfit and rent the compressor (if you don't have one) and the necessary impact wrench and socket. Good luck.
What else can I help you with?
What direction do you turn the 21mm center bolt when taking off the crank pully on a 1997 kia sportage?
counterclockwise.
What direction do the 21MM center bolt on the crank pully turn to take off on a 1997 kia sportage?
counter clockwise. That is once you'ved braced the engine so it won't turn when you try to undo it.
How do you take off crank gear on 2002 Kia Sportage?
turn the bolt counterclock wise to get it off. I am surprised you did not ask how do you keep engine from turning as you attempt to undo the crank bolt.
What direction does a pully tentionure turn to come off?
i have a 00 mustang with a 4.6l gt. i need to pull off the pully tentionere. but i dont know what direction the bolt should be turn to losen it up. does any one know what direction.
Timing chain too loose cant break crank shaft bolt loose to get pully off?
use impact gun
How do I take the bike crank off?
To remove the bike crank, you will need a crank puller tool. First, unscrew the crank bolt using a wrench. Then, attach the crank puller tool to the crank arm and turn it clockwise to pull the crank off the bike.
How do you take a bike crank off?
To remove a bike crank, you will need a crank puller tool. First, unscrew the crank bolt using a wrench. Then, attach the crank puller to the crank arm and turn it clockwise until the crank comes off. Be sure to follow the specific instructions for your bike's crank system.
How can I take a crank off a bike?
To remove a crank from a bike, you will need a crank puller tool. First, unscrew the crank bolt using a wrench. Then, attach the crank puller tool to the crank arm and turn it clockwise to pull the crank off the bike. Be sure to follow the specific instructions for your bike's crank system.
Where is your crank sensor on your 94 Ford Probe?
there are twoCrank sensors on the ford probe GT. One is located in the distributor that control spark and by taking the passenger front wheel off and to the right of the crank shaft pully you will see a one bolt device with three wires, that is your lower crank sensor.
How do you take the cranks off a bike?
To remove the cranks from a bike, you will need a crank puller tool. First, unscrew the crank bolt using a wrench. Then, attach the crank puller tool to the crank arm and turn it clockwise to pull the crank off the bike. Repeat the process for the other crank arm.
How do I take the crank off my bike?
To remove the crank from your bike, you will need a crank puller tool. First, unscrew the crank bolt using a wrench. Then, attach the crank puller tool to the crank arm and turn it clockwise to pull the crank off the bike. Be sure to follow the manufacturer's instructions for your specific bike model.
How do you replace an idler pulley on a 1999 Ford f150 4.2ltr?
first you should release the belt tension pully and remove the belt. Then the idler pully has a bolt through the center remove the bolt and the pully should come off.
