0
What else can I help you with?
How do you disable the alarm on a 2000 camaro?
Unplug positive battery post after locking both doors. wait a minute and the unlock the passenger and then start the car within 10 seconds of unlocking it. thats what i did, and it worked
Your Toyota remote is working but when you press the button - the central locking does not work Doors now won't open and you cannot 'click' the button to start the car?
Click it twice fast
What is wrong with a Chrysler Cirrus 1996 if a small red light on the upper right dash is blinking The car acts like it wants to start but won't?
Theft alarm has been activated. Try unlocking the doors with the key.Theft alarm has been activated. Try unlocking the doors with the key.
Toyota central locking system does not respond to the car remote Therefore your doors will not open up Doors can be opened up manually but in order to start the car you have to push the button on your?
buy a new key battery..............alarm will sound for ages but car should start with correct key anyway even with flat battery (which sometimes occurs in a ladies purse with tons of stuff in it pressing the lock button) and can be driven.
Does the Chevy aveo car 2004 require the key fob to start?
The 2004 Chevy Aveo does not require a key fob to start the vehicle, as it uses a traditional key ignition system. The key fob is primarily used for remote locking and unlocking of the doors. However, if the car is equipped with an anti-theft system, the key must have a transponder chip for the engine to start. Always check the owner's manual for specific details related to your vehicle.
Why when you start the car the doors automatically lock and when you stop you have to manually unlock them in order to get out of the car Toyota Camry LE 2002?
It is just a safety feathure that Toyota has.
How do you reset the car alarm when the battery has been dead for several months on a 1999 Toyota Camry?
When I replaced my wifes battery in her 98 Camry, I had her put the key into the ignition, turn it to "on" position, then I connected the battery cables, then have to take out the key,,,get out of the car,,,lock the doors using the key,,,,,open the door lock using the key,,,then start the car...seems that opening and unlocking the doors resets the alarm,,,
How do you get the automobile to work after you unhook the battery cable on a 1994 Jeep Grand Cherokee Laredo you Purchased it used and it did not come with a owners manuel?
When I replaced the battery on my 1994 Jeep Grand Cherokee it would not start up. I got it to work by locking all doors and then unlocking the doors. After doing this it would crank up. Hope this helps. Additional Info: Exactly. When you disconnect or change the battery the factory alarm engages and activates the engine kill switch. Just reconnect the battery and lock and unlock the doors with your key to reset it.
Security light flashes then wont start 98 achieva?
Have you tried unlocking the doors with the remote? I don't know if it will work on GM cars, but it works on at least some Fords.
Why will your 2004 explorer sport trac not crank with a good starter And why is the anti theft light blinking?
problem with anti theft take to the dealer Check under your dash, you may have a reset button that will allow you to start your Trac with that. The only problem is that every time you need to start your Trac, you will have to hit that button before hand. Also try locking your doors, then unlocking them with your key fob, then try starting your Trac.
How do you reset a 93 Grand Wagoneer Alarm System to Enable Engine Start?
try locking the doors and using the key unlock the passenger side door
How do you program your remote for your 2006 Jaguar XJ8?
To program the remote for your 2006 Jaguar XJ8, start by sitting inside the vehicle with all doors closed. Insert the key into the ignition and turn it to the "On" position without starting the engine, then turn it back to "Off." Press and hold the "lock" button on the remote while turning the ignition back to "On," then release the button and turn the ignition back to "Off." Your remote should now be programmed; test it by locking and unlocking the doors.
