Normally that light is an indication there is a problem with the brake system and MOST of the time that is low on brake fluid. There is a possibility (though remote) there is a problem with the switch on the emergency brake pedal.
The 1994 Toyota Camry emergency brake light switch can be found beneath the drivers side dashboard. The emergency brake light switch will be beneath the far left hand side of the dashboard.
it means your emergency brake, or hand brake is set. if the brake is released, check cables and sensor. could also be the switch or sensor.
The dashboard brake light usually indicates a differential pressure malfunction between the two sides of the master cylinder, or that the emergency brake is on. Check the emergency brake, then check the master cylinder. You may need to bleed the brakes. You may need to reset the master cylinder, although they usually reset by themselves.
If your ABS emergency brake light and the track control light show up on the dashboard, you are having a brake problem.
A stock emergency brake, on a Chevrolet truck, can be released by manually disengaging the emergency brake. This can be accomplished by loosening the tension nut on the brake.
You need brake fluid
The release handle is right above the parking brake pedal underneath the dashboard on left side.
If you mean the brake light in your dashboard, it means that you have your emergency break on while the car is on.
Push the brake pedal to released.
parking, or emergency brake
I'd check the sensor for the emergency brake. It's probably faulty.
cut the wire