The 4WD switch is located in the transfer case. It is possible that you have a broken wire that is making intermittent contact.
Download the FREE Suzuki Samurai Shop Manual from http://www.suzukiinfo.com/
or visit zukikrawlers.com
zn
LOCK THE HUBS........
4wd comes on automaticly
On a 2001 Ford Ranger : If you have selected 4X4 HIGH , yes , you should see (4WD in your dash ) If you have selected 4X4 LOW , yes , you should see (4WD LOW in your dash )
No special button, just pull the smaller gearshift down, and you will see the "4WD" light on the dash. down position is high 4WD and down and over to the righ and up is Low 4WD.
It is located on the transfer case. It controls the vaccum to the actuator.
Yes, if everything is working properly.
It is best to be stopped. Pull the 4wd lever backwards into 4wd and the icon on the dash should light up. If this doesn't work there is a problem with this system.
well,, you can start by turning the switch on your dash that says '4wd'
1. sensor to tell the computer when you were driving in 5th gear. 2. sensor to turn on the backup lights when you were in reverse. Also, there are wires going to your transfer case, that light up the '4wd' light to show when you are in 4WD rather than 2WD, IIRC. Paul H.
The "4 Wheel Drive" dash light typically indicates that the vehicle's four-wheel drive (4WD) system is engaged or in operation. This light can also signify a malfunction in the 4WD system, such as an issue with the transfer case or related components. If the light remains on or flashes unexpectedly, it is advisable to consult the vehicle's owner manual or a mechanic to diagnose and resolve any potential issues.
your shift motor on transfer case is probaly no good and needs to be changed or is also called encoder motor
Try getting a new swich button